The Rubberflex epdm granules and poured rubber products warehouse
Poured in place rubber flooring contractor? You're at the right place.
Trylawnturf is a distributor of Rubberflex epdm rubber granules.
The only one in Quebec, we deliver to contractors all over the province, but you can also pick up the products in our warehouse at 3465 Thimens, Ville St-Laurent.
Base layer
SBR-granules base layer
Sold in a 44 pounds bag (22 kg). Covers 13 s.f. (for a 1" layer)
Top layer
Top layer composed of EPDM granules
Rubber granules available in various colors.
Sold in bags of 55 pounds (25 kg). Covers 50 s.f. (for a 1/4" layer)
Binder
Clear aliphatic polyurethane binder.
Formulated to preserve the color of the granules.
Sold in containers of 42 lbs (19 kg). Sufficient for 4 bags of 25 kg EPDM granules.
EPDM colors available:
000 - Brick
100 - Blue Grey
150 - Capri Blue
200 - Yellow
210 - Beige
240 - Egg shell
280 - Brown
290 - Pearl
340 - Purple
380 - Grey
400 - Patine Green
410 - May Green
540 - Turquoise
597 - Earth Yellow
580 - Teal
590 - Rainbow Blue
750 - Rose
Use the colors according to your imagination! Combine two or more colors for a marbled, textured effect, imitating sand, etc. Examples:
Barnie
340 (50%) + 290 (50%)
Brick
000 (50%) + 290 (50%)
Cappuccino
290 (60%) + 280 (20%) + 210 (20%)
Caramel Brown
280 (50%) + 290 (50%)
Crispy Crunch
570 (50%) + 280 (40%) + 290 (10%)
Dark Vader
390 (50%) + 380 (25%) + 290 (25%)
Flake
380 (50%) + 390 (25%) + 290 (25%)
Gold
210 (75%) + 000 (25%)
Indogo
390 (33%) + 100 (33%) + 380 (33%)
Ocean Blue
590 (50%) + 580 (50%)
Purple Rain
390 (33%) + 340 (33%) + 290 (33%)
Sand Grey
380 (75%) + 290 (25%)
Turtle
410 (75%) + 290 (25%)
Poured rubber installation
Steps for installing a poured in place rubber surface.
In summary: mix your choice of rubber granules with a binder, then trowel directly onto a flat surface*. Leave to dry.
Steps
-
First absorbing layer
Laying of the SBR black rubber underlayment (recommended 1" thick)
-
Main epdm layer
Add the layer of epdm granules of colors, 1/4 inch thick or more.
-
Leveling
Level the surface with a trowel
-
Edging
Plastic guides will contain your shape
-
Dry
Let the surface dry for up to two days
STEPS AND EQUIPMENT FOR INSTALLING A RUBBER FLOOR SURFACE
- ABSORBING FIRST LAYER
A backcoat of black aggregates (SBR rubber made from recycled tires) is recommended for technical underlayments, ie for cushioning of the covering, for example in play areas. Thickness to be defined according to the Desired damping. Trylawnturf can install this layer in accordance with applicable provincial and provincial safety standards.
The black granules are sold in a 44 pounds bag, and cover 13 s.f. 9for a 1 thick layer). - Surface prep*
If you're not installing a primer, you can spread the mixture directly onto your surface. The rubber can be poured ton several types of surfaces such as plain paving, cement, asphalt, wood, compacted stone... For best results, make sure your surface is clean before applying. For more stability, you can use glue to spread on your surface before the application of the granules. - The EPDM granules
Also known as rubber granulates or colored EPDM. Used for the topcoat (recommended thickness: 1/4 inch). The rubber granules are sold in a 55 pounds bag of a single color, but you can mix colors for a textured or marbled effect. 1 bag covers about 50 square feet of surface. - The mix
Mix the aliphatic binder with the granules. This binder is specially formulated to preserve the color of the granules. Sold in containers of 42 pounds, enough for 4 bags of epdm granules. - Cleaning
Use a mixture of urethane grade solvents to clean dirty tools, or clean with a lubricant. - Drying time
It is recommended to allow the synthetic surfaces to dry for 2 days for maximum hold.